Page 1 of 1

Ground tackle

Posted: Wed May 10, 2017 11:49 am
by Sabre27Admin
Iain C
United Kingdom
181 Posts

Posted - 06/05/2010 : 22:10:29
We're off for our first proper cruise in early June and I want to make sure our ground tackle is up to the job. I know this is literally a "how long is a piece of chain" question, but I wanted to ask the more experienced what they would consider sensible in terms of rode/ground tackle.

My anchor is a CQR, and marked with 24 1/2 on one side. I have about 60' of chain. I was going to add about another 60' of nylon warp, but I was wondering what diameter to go for, and also I was wondering if there would be sufficient room for it in the anchor locker.

Picture of a rusty end of the chain (it's not all like that!) and the CQR just about visible in this pre-refit picture.
4585174490_3e37eec16e_o.jpg
4585174490_3e37eec16e_o.jpg (231.33 KiB) Viewed 3690 times
sabre27
178 Posts

Posted - 06/05/2010 : 22:56:39
Hi Iain,

Just a quickie, I am dashing away back to Corsair.

Minimum requirements:
Depth to chain length 3:1
Depth to rope length 5:1

To Anchor in 10mtrs (deck to sea bed!)requires your 20m of chain gives 7m depth, plus rope for the other 3m requires 15m of your 20m of nylon. Multiplait has the best stretching ability, complex splice to chain!

Do your sums and add some.

Then there is your kedge.......

Paul Howard. S27OA Technical Officer.