Search found 42 matches
- Tue Jan 09, 2024 6:48 pm
- Forum: General Discussion
- Topic: Fitting keel shoes
- Replies: 2
- Views: 20879
Re: Fitting keel shoes
Hi John, and welcome. Sorry about this slow response but Christmas got in the way. With the Sabre's encapsulated keels you will never have keel bolt problems but you are wise to be nervous about abrasion. it's unusual to find a Sabre without keel shoes, although one did lose its shoes when they beca...
- Sun May 21, 2023 12:48 pm
- Forum: General Discussion
- Topic: Boarding ladder options
- Replies: 3
- Views: 6351
Re: Boarding ladder options
Whatever type of fixing you go for, it's worth choosing a ladder that can extend so that its bottom rung is well below water level - whether you want to swim off the boat or use it in a man overboard situation.
- Fri May 12, 2023 9:47 am
- Forum: General Discussion
- Topic: Skeg (soundness of)
- Replies: 4
- Views: 6991
Re: Skeg (soundness of)
Paul, It sound as if that is a single-keel Sabre. On the twin-keeler the skeg is moulded with the hull and is very rigid. The hull for the single-keeler was moulded with a recess for the skeg moulding. Details may have changed over the production run but on one boat the flanges of the skeg moulding ...
- Sat Jan 07, 2023 11:02 am
- Forum: General Discussion
- Topic: Loadings - Anchor bollard and cleats
- Replies: 2
- Views: 7851
Re: Loadings - Anchor bollard and cleats
Prof. John Knox did a lot of research on anchor loads, including load cell tests, and came up with the formula: Force (kg) = wind speed (kn) squared x length (m) squared divided by 500. Obviously, it is an approximation but it is more logical then it looks because effective width (when the boat shee...
- Fri Dec 02, 2022 3:26 pm
- Forum: General Discussion
- Topic: Discounts on marine electronic equipment
- Replies: 2
- Views: 7987
Discounts on marine electronic equipment
The S27OA has negotiated a discount agreement with a major manufacturer, under which Association members may purchase their products with discounts of up to 25%. For full details, look on the front page of our website and follow the instructions. Happy Christmas!
- Sun Sep 25, 2022 4:52 pm
- Forum: General Discussion
- Topic: New Sail Costs
- Replies: 11
- Views: 21778
Re: New Sail Costs
In 2004 I commissioned a new genoa from Crusader. It has been used intensively for 3 months of every year, including 2 round-Britains, one round-Ireland and various other trips to east Coast, La Rochelle, etc. No problems although I am fairly diligent with a needle and thread, because surface stitch...
- Wed Aug 24, 2022 2:29 pm
- Forum: General Discussion
- Topic: Original Window frames wanted
- Replies: 2
- Views: 7965
Re: Original Window frames wanted
If you want a decent set of window frames you may have to commission new ones, because any used frames are likely to be U/S, or may not fit your openings (there were some variations). I got mine from the firm trading as Technautic and they have been very satisfactory. The most important stage is the...
- Sun May 08, 2022 8:31 am
- Forum: General Discussion
- Topic: Mainsheet system
- Replies: 3
- Views: 9393
Re: Mainsheet system
A mid-cockpit mainsheet anchorage is certainly not daft. Mine is in the attached pic, and this is almost identical to the designer's original layout. The tiller needs to be slightly shorter than on a Sabre with a bridge deck track but it has ample leverage. The hatch area is much safer without the t...
- Mon Apr 25, 2022 11:18 am
- Forum: General Discussion
- Topic: Metal Window Trim
- Replies: 8
- Views: 13742
Re: Metal Window Trim
Another slow reply - because I had to inspect our boat's mouldings. Much of the galley area inner moulding is only bonded to the hull with resin poultice, which is essentially a filler, unlike the starboard side where longitudinal shelves are bonded with grp tape. However, some parts of the partial ...
- Thu Mar 31, 2022 8:42 am
- Forum: General Discussion
- Topic: Metal Window Trim
- Replies: 8
- Views: 13742
Re: Metal Window Trim
I'm a bit late on this thread but it sounds as though you simply need a set of new alloy-framed windows. They can be provided by TECHNAUTIC MARINE WINDOWS - they are on the web. You will need to take cardboard patterns and there is more than one kind of frame section. For instance, my set have an in...