Stubborn Cutlass bearing

This forum is for members general information exchange. You must register with name and valid e-mail address before being able to post a message. Non members are welcome to make contact with us through this forum. Please don't include your personal contact details in your message.
Post Reply
samphire2014
Posts: 65
Joined: Tue Jul 18, 2017 12:47 pm

Stubborn Cutlass bearing

Post by samphire2014 »

What is the best method or tool to grip the bearing housing so it can be unscrewed please?
samphire2014
Posts: 65
Joined: Tue Jul 18, 2017 12:47 pm

Re: Stubborn Cutlass bearing

Post by samphire2014 »

CUTLAS BEARING AND PROP REPLACEMENT. So, they are all off, bearing replaced and time to re-install. Do you seal the cutlass bearing housing to the hull and if so with what? Do you use a release agent on the threaded bits securing it to the hull and do you add a release agent (Copperslip/White grease/Molykote111?) to the prop shaft and keyway, before refitting the prop?
Post Reply