Headlining

[Sabre27Admin]

Wingsofdawn
10 Posts

Posted - 01/08/2008 : 09:42:48
Hello, Has anybody any contact details for suppliers of new headlining. My old foam backed headlining has turned to dust leaving an unsightly black stained fibreglass structure.

Look forward to your suggestions.

Shamal
United Kingdom
41 Posts

Posted - 06/08/2008 : 13:38:40
You could could try the following site, we've not used them but I heard they a very helpful:

http://www.hawkehouse.co.uk/

Good luck
Neil

sabre27
178 Posts

Posted - 06/08/2008 : 19:16:08
Toomers are one of the major suppliers on the South coast. I have used them often. They have a comprehensive web site but you can't see or feel the products on the screen! They are pretty quick sending samples. Paul Howard

TOOMER AND HAYTER
74 Green Road,
Winton,
Bournemouth,
Dorset,
BH9 1EB

Tel 01202 515789
Fax 01202 538771
Email:

Web: www.toomerandhayter.co.uk

Wingsofdawn
10 Posts

Posted - 07/08/2008 : 21:23:55
Thanks for all your help. Both sites are very helpfull.

mturvey
United Kingdom
10 Posts

Posted - 19/09/2008 : 17:56:30
Not sure where you are, nor whether you intend re-lining yourself.

I can recommend Solent Boatcare (Adrian Bagshaw - 07855 161599) if you need a re-lining job done and happen to be twixt Poole and Chichester.

Mark


Mark Turvey
Sabreon; Fareham

keith
United Kingdom
118 Posts

Posted - 15/11/2008 : 18:08:29
If contemplating redoing the headlinings the worst job is stripping the old glue of the GRP. While cleaning Sabre run today i wondered if a pressure washer would do the job. It ripped all the old foam residue & old contact adhesive of like a dose of salts,the whole lot off from end to end in two hours flat. I did drill a one inch hole through the bottom to let the water out! First class result!