The Sabre 27 Forum was an incredibly useful resource for members and enthusiasts alike. Unfortunately due to relentless hackers constantly compromising the system, it had to be taken down in 2025. We have since collated all of the discussions and images into this searchable archive. Whilst new posts can’t be added, all of the useful discussions remain. Live discussion can be found on the Sabre 27 Facebook page.
Explore discussions from the former Sabre 27 Owners Association forum. This is a read-only archive; historic advice, contact details and external links may be out of date.
Recommendation for someone to fix leaky stern chute and rudder post. Boat in Hamble. Does anyone know a reliable firm; Ancasta have been terribly slow so far.
This may sound stupid but I have a blocked galley sink and blocked shower drain. Now I know they drain under the waterline so do they have some kind of non return valve fitted or can I put a plumbers corkscrew down it? All other solutions welcome !!
I am In search of a spinnaker pole or at least a whisker pole for Moonlight. Anyone point me in the right direction?
Hello My Sabre 27 Mark 1 has a rudder that wobbles above 5 knots I suspect tired bearings of the rudder need to be replaced Does anyone know somebody that could do this job for me? My boat is at Newhaven, East Sussex Many thanks Alex
can anyone recommend a supplier for a replacement fuel tank please?
My first post as the proud new owner of a Sabre 27 (actually, my first ever boat, so basically clueless). I need to replace the engine inspection hatch in the floor of the cockpit. Currently it's neither safe nor watertight. Would anyone have any idea where I
rory7520 United Kingdom 58 Posts Posted - 05/01/2016 : 22:42:25 Happy New Year to one and all. I am just about to research the replacement of my old 12 volt mini strip lights in the saloon and forward cabin. While they work perfectly well, my ageing eyes need
rory7520 United Kingdom 58 Posts Posted - 05/01/2016 : 22:42:25 Happy New Year to one and all. I am just about to research the replacement of my old 12 volt mini strip lights in the saloon and forward cabin. While they work perfectly well, my ageing eyes need
sabre27 178 Posts Posted - 08/05/2015 : 19:49:54 I have used this company for many years. Seals+ Direct Ltd Unit 6 Milton Business Centre Wick Drive New Milton Hants BH25 6RH Tel: 0845 226 3345 or 01425 617722 E-mail: sales@sealsplusdirect.co.uk Web: www.seals
looking4 United Kingdom 26 Posts Posted - 12/02/2015 : 17:15:12 B & K Marine Windows 01603 716171 speak to Kevin Kevplatten@hotmail.co.uk Business address Silverline Marine Riverside Estate Brundtland Norfolk NR13 5 PL Good sturdy construction with 6mm tough g
keith United Kingdom 118 Posts Posted - 09/05/2009 : 20:16:43 New stern gear (cutless housing, stuffing box, tube, coupling, shaft) for Sabreuse was purchased from T Norris industries of Isleworth, extremely good quality real gunmetal castings. They have a goo
johnle United Kingdom 33 Posts Posted - 17/01/2013 : 20:20:34 Just had a lovely straight grained ash tiller made with a curve by Designs in Wood 8 Heath House Lane Lower Tean Stoke on Trent Staffs ST10 4LP 07970175959 David Hanlon It is best to send him the ol
Sailor_Martin Germany 3 Posts Posted - 13/09/2012 : 20:17:10 Hi, we need for our Sabre 27 a new mainsail, but first of all we need the original dimensions of the mainsail. We are sailing our Sabre in the Netherlands with a mainsail, which looks not like the or
Wingsofdawn 10 Posts Posted - 27/05/2009 : 11:06:56 Hello Having removed the old exhaust elbow from my YSE12 complete with blown hole I have been trying to locate a replacement quicker than the four weeks quoted by my local engineer. After searching the SOA fo
rory7520 United Kingdom 58 Posts Posted - 03/08/2012 : 09:57:48 I have found a hard wood supplier whose service I thoroughly recommend to all SOA27 members. Although based in North Essex (and I live in Wiltshire) I ordered over the phone and two days later had
Sabre 27 Gallery
Videos
Specs
Officers
Shop
Forum Archive
Facebook
Contact