The Sabre 27 Forum was an incredibly useful resource for members and enthusiasts alike. Unfortunately due to relentless hackers constantly compromising the system, it had to be taken down in 2025. We have since collated all of the discussions and images into this searchable archive. Whilst new posts can’t be added, all of the useful discussions remain. Live discussion can be found on the Sabre 27 Facebook page.
Explore discussions from the former Sabre 27 Owners Association forum. This is a read-only archive; historic advice, contact details and external links may be out of date.
I’m appealing to those more knowledgeable than I on these matters. The top of the rudder on Calypso where it passes through the cockpit sole has quite a bit of sideways play. This has been there some time but appears to be getting progressively worse. Is it st
Hello My sabre 27 has some engine shaft vibration at certain speeds only Anyone has any suggestions on what could be done to reduce this? Many thanks Alex
Can anyone confirm the ideal lifting points to raise a Sabre 27 fin keel out of the water? Many thanks Alex
Has anyone used Delrin for the bottom bearing in the skeg instead of tufnol? I fancy giving it a go as I'm on a mud berth in the river Itchen. Just to try it out.
I am looking at replacing the engine on Wildcat with a new Beta20. Beta tell me that their local agent in Hamble has fitted the engine that has a standard sump in a number of boats, but I am concerned that this may be a bit tight, given the shallow bilge in th
Hello I have a Mark 1 and would like to replace the original genoa sheet Gibb winches with a fixed handle at the bottom Any suggestions? Thanks Alex
Hello I have recently purchased a fin keel Sabre 27 and would like to know if anyone had the experience of doing the maintenance of the Gibb winches with a fixed handle on the bottom? The winches on my boat are a bit stiff and presumably they need cleaning and
I am sure we have all had our heads turned by the Bavaria, but a quick glance at prices is a refreshing splash of sea spray. Having said that, my mind turned to the possibility of moving on from my Sabre. Jeaneau, Moody or Sadler appeared to be possibilities,
Is anyone able to let me know if there's a Trident 24 in this video (and, if so, where in the timecode does it appear)? https://www.youtube.com/watch?v=9v5XUCqwo7Q
Has any one out there got a Radio, Stingray 5600, by NASA marine, also goes under the Aquamarine brand. Whilst I can hear broadcasts by other stations clearly, I am getting comments that my transmissions are faint. Have any of you a similar experience or sugge
After many years of hanked foresails I have decided to install roller reefing. "Rumpus" is number 20 in the production run, therefore she is a mark 1 with the shorter mast. I would like to know what are the ideal dimensions of sail that I should look for.
My first post as the proud new owner of a Sabre 27 (actually, my first ever boat, so basically clueless). I need to replace the engine inspection hatch in the floor of the cockpit. Currently it's neither safe nor watertight. Would anyone have any idea where I
I have a set of Sabre 27 unused rigging which is no longer needed. Open to sensible offers. Collection from Southampton (set days) or Hinckley. http://castoffs.eu/images/Sabre_27_rigging.jpg
Hello to the forum-members, due too an unsuitabel craddle and lack of expirience from my part, my finkeel Sabre has slipped from the hardstanding during a wintergale. Westwind.jpg Fortunataly there were little visible damages, but as I realised later on, rudde
Apart from the option outlined in the technical manual, has anybody attempted to cure this problem by using 2 pak waterproof foam?
Sabre 27 Gallery
Videos
Specs
Officers
Shop
Forum Archive
Facebook
Contact